Today the term ‘handmade gemstone jewellery’ has become more synonymous with the beaded type of jewellery which is made from gemstones which have two holes for wire or thread to go through. Cut stones, which are typically used in engagement rings, are not generally referred to as handmade gemstone jewellery.
There are two main types of gemstone styles in use in handmade gemstone jewellery. One type is the larger stones which can be cut in a wide variety of shapes i.e. round, square, oval, twisted etc, as well as roughly faceted and hammered stones buy gold in abu dhabi. These stones generally tend to be any size from 4mm to 20mm in width. These stones are used primarily for the chunkier types of gemstone jewellery often combined with other materials.
At the smaller end of the spectrum lie the more finely faceted gemstones which are more commonly found in round, briolette and rondelle shapes and these have been cut especially finely for an extra sparkle and often called ‘micro faceted’. These measure within the range of 2mm to 7mm in size and this style can be found in a wide range of precious as well as semi-precious gemstones. These smaller faceted types are more delicate and easily lend themselves to more petite styles of jewellery such as earrings and pendants. They are also used with headpins and wire wrapping to gather together a small bunch of stones for a pretty clustered effect.
As for choosing the right sort of gemstone type to suit you, if you are of a larger build you can easily wear the more chunky styles – which of course may well have finer stones intermingled between the larger beads. You can get beautiful large rough nuggets with a wonderful organic look to them in many types of gemstones, even the more expensive sapphire, ruby and emerald gemstones. Bear in mind that large gemstones can be quite heavy when wearing them so it is useful to check the weight of the jewellery.
Another option, particularly for more petite ladies, is to choose the smaller faceted sparkly gemstones which can be obtained in rubies, emeralds and sapphires as well as the less expensive stones like the quartz family. Therefore one can find rubies for example in a bead style which are truly beautiful stones, so it is important not to be misled and assume that only cut gemstones like the type used for engagement rings is the only choice in the market for the precious gemstones.
CAD is a Computer aided design software used to create jewellery items. CAD does not completely replaces traditional techniques of making masters by hand but rather used in jewellery manufacturing to cut the costs, to create masters of jewellery items that have been hollowed out to cut gold content (otherwise their manufacturing would be almost impossible) and to save gold wastage created by filling and off cuts. But there are other reasons as well. CAD produces images in a number of different angles as well as the rendered image allowing both the designer and the customer to visualise the final design and make necessary alterations before any manufacturing is started.
From CAD to life
Once the design has been approved by the customer it will be printed in wax using 3D printer, a form of additive manufacturing technology where a three dimensional object is created by successive layers of material, in this case wax.
This wax model that has been created is used to cast the jewellery item in the required metal and the correct size. To finish the process the item is filled, buffed and pre-polished to a high standard and then hallmarked. All the jewellery in silver above 7.75 gram, gold 1 gram and platinum above 0.5 gram in weight should be hallmarked. After the hallmarking process the item will be stone set (if necessary) and given a final polish.