Have you ever wondered if you could perform a car stereo installation yourself? The fact is that you can do it yourself, so spend that money on your hardware! Don’t throw money away on labor. Besides the money savings, doing a car stereo install yourself can be a very gratifying experience, not to mention you will be able to learn a lot from it as well. Nothing quite beats the feeling of beholding your “creation” in action, operating smoothly and perfectly.
When you are installing a car stereo you have to ascertain what kind of system you’re going to install in your vehicle. If you are a novice, it is better you attempt a car stereo install if it’s just a simple system. You might prefer to leave the complex stuff to the audio professionals, like installing sensitive equipment such as LCD panels, motorized parts etc particularly if it calls for the creation of custom panels and such Launch Crp129x Obd2 Scanner.
Receivers or head units are among the easiest to do when installing a car stereo. Fortuitously, just about all units abide by the same size standards (DIN). In a lot of cars, when the factory radio is tak en out the aftermarket radio receiver will fit in the empty hole. In many other automobiles, a special kit is called for if the factory hole is too large, or not deep enough. In a few instances the dash has to be modified by cutting it and making it larger. If this is the case for you, any car stereo store should have the kits required for the modification.
There are two main types of mounting systems in a car stereo installation. ISO mounting is when the radio can be attached to existing factory radio brackets, which is the case in most Japanese automobiles. Ring mounting is when an aftermarket radio goes with a metal ring that is mounted to the factory radio hole or with an aftermarket kit through flexible tabs. In a lot of cars, dash and trim rings must be filed to expand the radio hole. When the ring is installed, the radio receiver slides in and is confined by snaps. In most situations, special tools are needed to remove the radio.
In a simple car stereo install, you’ll likely be utilizing speakers that accommodate a factory location. Just make certain there are no gaps or holes. Occasionally constructing a wood or fiberglass baffle aids to reduce holes and brings about a much better sound. But always be mindful when using power tools close to speakers. Car stereo warranties typically don’t cover holes in speakers.
A car stereo install has to be done well to deal with vibrations and other noise sources in its environment. Even though it is unimaginable to do away with these altogether, there are products that will greatly diminish the noise and rattling, especially on non-luxury automobiles. Linings, sprays and adhesive material and even carpet applied onto the panels can make huge difference.